Hygrometer Mount for Any Benchy!

Don't use up your filament printing a whole mount or stand for your hygrometer!  Just print this and attach to any Benchy!

 

We all have at least one Benchy, and many of us have just too many! All they do is sit there and look good, so I thought I'd give them a purpose. With this, we save precious filament and put our beloved Benchy to good use, holding up our hygrometers.

 

Simply press your round hygrometer/thermometer into the hoop and then place the peg into the smokestack of any Benchy. Pivot the hygrometer to face any direction relative to your Benchy. The hoop is intentionally tight, so it takes just a little stretching to get it around the hygrometer, but it is very doable!

 

Peg too big for your Benchy? I found that all of my many Benchys would fit except one that was too tight. So, I made a print profile with a smaller peg for those of you who find you can't fit the peg into your Benchy.

 

The tilted angle makes it easy to read the display on your hygrometer while standing or sitting.

 

Don't have a Benchy yet? Print one in 15 minutes here.

 

I went through several iterations making the hoop and the peg just the right size, but let me know if you have any trouble with fitment or angle, and I can easily make adjustments. Have ideas to improve it? Let me know, and I'll do it!

 

Boost MeIf you enjoy this, consider leaving a boost! It really motivates me to come back and make more cool stuff to share with you.