Zenitsu, Demon Slayer Bookmark

The new Demon Slayer movie, Infinity Castle just came out. Was inspired to make a couple bookmarks. This bookmark is of Zenitsu Agatsuma and his patented orange-yellow glow. I deferred from Tanjiro and Nezuko framed cutout design to better capture the glow with the black background and further enhancing it with the red-yellow border.

Zenitsu

Pictures shown are printed in an 0.2mm Nozzle
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black  Transmission Distance: 0.4
    PLA BambuLab Basic Red  Transmission Distance: 4
    PLA BambuLab Basic Yellow  Transmission Distance: 6
    PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.80mm) swap to Red
    At layer #15 (1.28mm) swap to Yellow
    At layer #19 (1.6mm) swap to Jade White for the rest.

Can be resized to accommodate your printer or preference by adjusting the X and Y axis the same percentage while leaving the Z axis at 100%. The best way to achieve this: With Uniform Scale checked, adjust the Y axis to the desired size (this will ensure the X axis is the same proportion as the Y axis), uncheck the Uniform scale, adjust the Z axis back to 100%, slice plate, and print. Stringing may occur with Hueforge, just use a lighter to whisk them away.