Sub - Zero Mortal Kombat Hueforge

Cold as ice.

This Hueforge artwork brings the iconic Mortal Kombat fighter Sub-Zero to life in a bold greyscale design, accented with chilling blue ice energy. The sharp detail in his mask and armour contrasts against the icy streaks, creating a powerful frozen effect that looks ready to leap from the frame.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 150x150mm in size
You may print at higher layer heights below the Base Thickness of 0.8mm
The Max allowed Thickness is 2.32mm and the Actual Thickness is 2.32mm

Filaments Used:
    #000000 PLA+ Sunlu Black  Transmission Distance: 0.6
    #ffffff PLA+ Sunlu White  Transmission Distance: 8.5
    #01b3ff PLA+ Sunlu Sky Blue  Transmission Distance: 4
This print uses 3 unique filaments

Swap Instructions:
    Start with Black
    At layer #11 (0.96mm) swap to White
    At layer #25 (2.08mm) swap to Sky Blue for the rest.
 

Remember if you want to resize then make sure you only change the X and Y (make sure the Z stays the same as changing this will affect how the print turns out)