Cat on fire (HueForge)

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Orange Transmission Distance: 5
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Orange
At layer #7 (0.64mm) swap to Scarlet Red
At layer #9 (0.8mm) swap to Yellow
At layer #16 (1.36mm) swap to Jade White for the rest.