Cauldron Double Light Switch Plate

Updated 10/8: I added thinner versions of both the rocker and toggle plates. The black cauldron part has been reduced from 3mm to 1.8mm so that it sticks out less from the wall plate.

Get your walls Halloween ready! This is a face plate cover for a double toggle or rocker light switch.

BE SAFE! PLA (and most other standard printing materials) are NOT fire-rated. This cover plate is designed to go OVER your regular light switch plate; just secure both plates using regular plate screws. I've included an optional edge surround in two different heights if you want to fully cover the edges of your plate to the wall. 

If you choose to use the edge surrounds, I recommend a drop of glue or three around the perimeter, but it may not be necessary depending your wall (you can probably just hold it in place by tightening the screws).

Let me know if y'all want a non-AMS version!

Matching photo frame here: https://makerworld.com/en/models/1844170-cauldron-frame-ams-no-ams-options#profileId-1970642.

Thank you to @mermaid308 for suggesting this idea!