Hose plug tapered 8,2-9,4mm V2

****** I have updated the model to version V2. It now has three additional rings to improve protection against fluid leakage. I also set the seam placement to random to avoid a continuous rib that could cause leaks. 

Also check the link to my other model page for many Metric & Imperial size plugs of this type.

https://makerworld.com/nl/models/2167341-metric-imperial-hose-plugs#profileId-2350201

This tapered hose plug is for easy inserting and removing when you want to stop leakage from an disconected device. I use this for my dehumidifier condense water drainage hose (see picture) when i store the unit. The insert is not tapered the entire length the last 6mm by the handle are straight with 3 rings to keep it in place and water tight. To easily remove just turn the plug anti-clockwise and pull. These dimensions where specific for my project but you can scale it in Bambu Lab studio for your project.

This plug is not to be used with pressure systems.

Filaments used:

• Generic PLA

Printer details:

• Created on a Bambu Lab A1
• Printed with a 0.4 mm Stainless steel nozzle
• Build plate: Textured PEI Plate
• Make sure the build plate surface is clean before printing to ensure the best adhesion