Phone Camera Slide Small

Hello Everyone, this is an original design (NO TREES WERE HURT IN THIS PROCESS) LOL JK

I designed this model as a Phone Camera Slider to take better pictures of your designs. If you need assembly documentation I will provide upon request. If you would like to customize this design - feel free sld parts are attached. Pretty simple design. Please sand down the rods with 1200 grit sand paper for smoothness. For added Smoothness * add a couple (A COUPLE) lol drops of oil on the rods. 

Parts List: 

1 M4 Socket Head Screw at 12mm 

1 M4 Nut

1 M4 Flat Washer

4 #6 x ½ in Screws FLAT HEAD

You gonna need the phone holder too if you don't already have one laying around. 

https://www.amazon.com/ThtRht-Connector-Replacement-Rotating-Cellphone/dp/B0C7CDHGBY/ref=sr_1_5?crid=2WDYXI2OGAZIR&dib=eyJ2IjoiMSJ9.X3_nFhtkjyIUafQfsebfTZUeWsoIL4D3LEitMb54XfIKI4e5jFKyIQAYWEr3iQ2xRsQfoehpwiDUsnBOsM16wSee6e4Eje8xB2rPokFsdclo41-FnyYo2x6UBHgrM0EGF4NH6y0rveejt7n7QxVE68bxosyho36f442vn32TEui6aBOrqYK2vaDgncQkIQ_ez7zI5xQc3RoDSLGUq_fQjm22rtKmKjFLJqZ5EVqxeAU.HjiGjcrxxdZSBRJKgadA8EjdTMfEJW5GIwe_kk_D6ec&dib_tag=se&keywords=phone+holder+replacement&qid=1760633157&sprefix=phone+holder+replacement%2Caps%2C122&sr=8-5

Let me know if this one doesn't work with the current ball gimbal and I will make you a new gimbal specifically for this 17mm size. 

Just let me know. 

If its too loose tighten the M4 bolt to your desired position then lock the phone holder down then attach phone. 

Version 2 in a few months when I can find some time.