Dummy 13 MEAT / MINOS PRIME

Boost Me"Ah, free at last" - MINOS PRIME
"EW Squishy" - MEAT
Please consider boosting, it Is free, greatly appreciated, and helps small creators alot :D releasing new models on achievement of boost goals

I recommend using a 2MM Nozzle for Precise Pieces like heads or weapons and a 4MM Nozzle for skeleton and armor/Body AND PETG HF or PETG for skeleton and armor/Body for better print quality

 NOTE I ALSO USE LIQUID GLUE FOR BETTER ADHESION 

click Liiiiiink for Glueeeee to get yo glue ---------------→  LIIIIINK FOR GLUEEEEEE

 

REQUIRES TRANSLUCENT PETG OR PLA AND RED PETG OR PLA

 

Do not use different material for the AMS version or they will not stick to eachother, ie dont use petg with pla or others, if using white/black petg you must use beige petg as well

 

DO NOT CHANGE BAMBU SETTINGS THEY ARE REQUIRED FOR INTERNAL ORGANS

if you are not using a bambu printer this wont come out right

 

I used the Bulky Dummy 13 as a base and used the arm and head sections from the printables page

 

Chest organs, brain drawn in and carved out by hand in bambu studio and the internal “veins” seen through the transparent petg is a product of internal infill being used to create the veiny effect

 

DO NOT CHANGE BAMBU SETTINGS THEY ARE REQUIRED FOR INTERNAL ORGANS

if you are not using a bambu printer this wont come out right

 

REQUIRES TRANSLUCENT PETG OR PLA AND RED PETG OR PLA

 

Do not use different material for the AMS version or they will not stick to eachother, ie dont use petg with pla or others, if using white/black petg you must use beige petg as well

 

instructions are self explanitory if you know how to build dummy 13's if not go to the original soozafoone post for instructions