Bring holiday cheer (and a little mischief) to your 3D printer with this whimsical Santa-in-the-Chimney model! Perfect for seasonal decorations, this design features Santa Claus halfway down a classic brick chimney, boots kicking in the air as he tries to squeeze through with his sack of gifts.
Print-friendly design with clean overhangs and minimal supports
Multi-color ready: optimized for AMS printing with separate parts for boots, belt, buckle, and chimney
Layered texture mimics the look of real fabric and bricks
Ideal for tabletop displays, mantel decor, or holiday dioramas
🌟 Features:
🎄 Holiday Charm: A playful take on Santa’s classic rooftop entrance
🧱 Detailed Brickwork: Realistic chimney texture with staggered brick pattern
🥾 Dynamic Pose: Santa’s boots mid-kick add movement and personality
🎨 Color Separation: Designed for easy multi-color printing with AMS or manual swaps
🧵 3D-Printed Texture: Visible layer lines add handcrafted character
🧩 Easy Assembly: Snap-fit or glue-ready parts for quick finishing
🛠️ Printer Settings:
Setting
Recommended Value
Layer Height
0.16-0.2 mm
Wall Line Count
2
Infill Density
15–20%
Supports
Yes
Build Plate Adhesion
Skirt
Material
PLA (multi-color optional)
Print Time
~1–4 hours (varies by size)
⚠️ Important Notes & Safety:
🧊 Let the model fully cool down before removing it from the build plate — removing it too early could warp or crack delicate parts.
🧰 Be gentle when removing supports! The bricks and santa details are fine and can break if pulled too hard. Use flush cutters or a hobby knife carefully.
💨 For best results, allow 10–15 minutes of cooling time before handling.
💬 Feedback & Community:
We’d love to see how your Santa turns out!
Share your makes and remix ideas and print profiles!
Leave a review to help others
Got tips or tweaks? Drop them in the comments!
Let’s spread the holiday spirit—one layer at a time 🎄
3D Models 4U
