Rattle

I made this rattle because i needed a simple and funny toy to print for a toddler.

The printing process is very simple and you use only 30 grams of filament!! if you are going to print the AMS model first make sure to rotate the face of the model to the plate to have a smooth reverse print. with every version i reccomend to print with 25% honeycomb infill to make sure that is not breaking apart on the first fall. for filling this model i used some airsoft “beads” but you can download and print the one published with this model (print at least 6 of them).

last but not least make sure you make the pause the layer before the closure of the square and  add the rattle fillers, then resume the print and the job is done!

!!ATTENTION!!  MAKE SURE TO CLEAN THE MODEL BEFORE GIVING IT AWAY ,I DO NOT ASSUME ANY RESPONSIBILITY FOR ANY MISUSE OR UNSAFE HANDLING OF THE PRINTED OBJECT!! MAKE SURE TO WATCH YOUR CHILDREN!

Boost MeBOOST IF YOU LIKED THIS MODEL!Boost Me