Mount bracket for Imou Camera for H2D/H2S/P1S/P2S

I recently got an additional H2S printer, and I noticed that the built-in camera sometimes doesn’t provide a top-down viewing angle and occasionally has a delay. Coincidentally, I had a spare small Imou camera, so I decided to design a mounting bracket for it to use with this H2S printer. This version can also be used with the P1S, H2D, and P2S models (basically, any printer that has a metal back cover).

This is what it looks like when mounted on the printer.

 

It uses around 20 magnets of the 6x3mm size. When I designed it, I thought it would need more magnets to make the bracket stable. But after testing, I found that just 15–18 pieces of 6x3mm magnets are enough for the mount to stay firmly on the printer. I also included extra holes in the design so you can add more magnets if needed. If you find your mount isn’t stable enough, you can install additional magnets. In my case, you can refer to how I placed the magnets — it’s quite stable.

The camera mount connector is quite common, so I think it should be easy to use with other camera models as well. All you need to do is check whether your camera’s connector is the same type as the one on my Imou camera. I also have a printed version available in case you don’t have one.

If you like it and there are enough requests, I can design versions for different camera sizes. And if you enjoy it, please give it a like and rate it 5 stars. If you can’t print it yourself or run into any issues during printing, please don’t give it a low rating right away — just message me, and I’ll help you out. Thank you very much!