Santa Suit Sleeve for Hand Soap Dispensers

Bring festive cheer to your sink with this 3D-printed Santa Suit soap dispenser sleeve—complete with a bold red coat, crisp white trim, and a jolly gold buckle that says "ho-ho-hygiene!" 🎅✨ Designed to slide snugly over your foaming hand soap dispensers, it’s the perfect way to add holiday charm to kitchens, bathrooms, or office break rooms. Sleek, seasonal, and easy for printing and gifting.

This is a decorative sleeve for hand soap dispensers. It was specifically designed for the foaming hand soaps sold by Bath & Body Works. 

It uses four colors, and has three color changes. All of the color changes happen when printing the outer sleeve. It uses less than 1 g of filament for support, and less than 2 g for purge waste. 

Two print profiles are included. One is for disposable bottles, which are smaller. The other is for refillable bottles, which are larger. All parts print quickly with a 0.28 mm layer height. 

This model comes with three parts:

• Inner sleeve (white). 
• Outer sleeve (white, red, and black).
• Buckle (gold or yellow). I recommend Bambu Silk+ gold filament for this. It will shine more if you can print it with a smooth build plate. 

Instructions:

• Slide the inner sleeve into the outer sleeve
• Slide the buckle into the slot on on the outer sleeve. The buckle doesn't snap into place. If you find it too loose, use a dab of glue. 
• Insert your foaming hand soap dispenser into the inner sleeve. 
• Enjoy!

Any rigid filament will work. But it will look better if the filaments you choose are matte, opaque varieties (except for the buckle, where you want it shiny!).