Holy Grail Stock Pack

The Holy Grail Stock Pack is finally here!

Each pack has its own folder and bambu file/print profile. Refer to specific recommendations from creators of supported designs Direct Mounts. PLA+ is fine for the rest, TPU for the pad.

Rail Pack is directly from my DeACR design, as I basically redid the whole thing. It’s not compatible with any of the other packs at the moment.

Other Packs 
Dissident
Scorpion
Holdup
Marsupial (In step files and completely unprinted & untested)

MP5 remix can be found here: https://makerworld.com/en/models/1967023-holy-grail-stock-mp5-remix#profileId-2114741

@TheRealUncleDan - Thank you for your contribution!!!

I went ahead and made some other pads and included them in the pack as well. 2 very basic TPU pads and a PLA pad, which you’ll have to glue on or something.

BOM 
2x) M2.5 x 23mm (can be up to 30mm) - adj tabs
2x) springs - cut in 1/2 - or comparable sized… - adj tabs
https://www.amazon.com/dp/B093ZX5HXK?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2
1x) M3 x 30mm w/ nut - cheek rest
1x) M5 x 40mm - RAIL Foldy part hinge
1x) M5 x 50mm - ALL OTHER PACKS Foldy part hinge
2x) M3 x 35mm(can be up to 45mm) - latch
1x) Ender 3 bed spring - latch (can fit a spring used for adjustment tabs in a pinch)
1x) M3 x 25mm w/ nut - Stock mount
2x M5x40mm w/ nuts -  Rail mount

Previous versions (included in step file) use more nuts

M3 Hardware kit - https://www.amazon.com/dp/B0DHG9NMLZ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1

M3 Nuts - https://www.amazon.com/dp/B075ZZW7VL?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_3&th=1

M2.5 Hardware kit - https://www.amazon.com/dp/B07J58257F?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1

M5 Hardware kit - https://www.amazon.com/dp/B0DHLQ9RHJ?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1

Accreditations
Uberclay/PrintsandtheRev - Literally would have been dead in the water from breaking the model so huge shout out to him, love you long time!
AWCY & V8VTwin - for the original ref cad. Hope y’all like my hundreds of hours refining this thing.
Allthingsfirearms -Holdup testing & suggesting
3D2A Remixes - Scorpion files and helped out a bunch testing
Walker Gordon - Testing dissident build
DB Firearms - Holdup files
MPRTECH - Dissident files
CipherPrints2A - Marsupial files
Unseenkiller - “Really Strong Latch” design
3DArms - QD mount 
Damascus_2a - original brace end file