AMS2 and AMS2 PRO dry box

Note: Do not use PLA. The AMS 2 includes a heater. While the heater shouldnt get so hot as to warp the PLA, I wouldnt recommend it. Stick to PETG/ABS. Also, I dont think there is a point printing other versions with a slot/hole for a Hygrometer/Hydrometer. Being so close to the dessicant it will give a false reading compared to inside the AMS2 which is the measure you actually need! (Unless you dont fill that one with dessicant I guess!). And with the AMS2 and Bambu Studio you can sort of find this out anyway. Apologies for the photo - should have used a clear color and these came out really shiny so what you see on the photo are not flaws but reflections!

Obviously print 3 boxes and lids! 

Also, as per my oringinal, I have included a sliding lid (with a handle!) so the dessicant doesnt pour out when you drop it (!). Note the lid only fits one way due to a small block at one end deliberately. That means it will only fit one way so if it seem like it doesnt fit, turn it round!

I have also added a funnel lid to help with filling the dry box.