Ender 3 V2 Wave Cooler | 5015 Fan

Boost MeIf you like my models a boost would be greatly appreciated! :)

Info

This cooler is meant to improve performance over the stock cooler by allowing you to mount different fans of your preference. The heatsink fan can fit a 4010 or 4020 axial fan. The part cooling fan in this design is a 5015 radial fan. The airflow of the part cooling fan is split up and routed to both sides of the nozzle. 

Doesn't interfere with the install location of a BL Touch sensor and has a hole to route the cables. This cooler is meant to improve performance over the stock cooler by allowing you to mount different fans of your preference. 

Printing

Recommended to print using ABS or another material that can handle some heat.

Hardware

• 2 x M4 x 20mm screw
• 4 x M3 x 15mm screw (for a 4010 fan)
• 4 x M3 x 25mm screw (for a 4020 fan)
• 2 x M3 x 8mm bolt*
• 2 x M3 Nut
• 5 x M3 x 4mm Threaded Insert**
• 2 x M4 x 5.8mm Threaded Insert**

* The hole at the top of the nut holder allows for longer screws 
** There is enough space behind the inserts to allow for slightly longer inserts

Assembly

Please read through the installation guide before committing to upgrading your cooler.