Umbrella Fan Guard For P2s & X2d

Thanks to @MrClean for the great idea, and to @user_82109241 for the zombie hand model

This icon has been my avatar for most of my life. One day, there was a suggest making a P2s fan cover with the Umbrella logo. Why not?

 

Boost MeBOOST make more headshot~

 

There are two plates in the 3mf, corresponding to AMS and manual filament change during a pause

Honestly, I don't have an AMS, so I'd appreciate feedback from AMS printing if goes smoothly

 

About manual filament change:

Please add a pause marker at layer 36 (already included; if using other layer heights, you'll need to calculate it)

For P2s manual filament change, you can unload filament during a print pause, same as the A1

However, when loading new filament, you need to click 'feed' on the screen when the filament is not yet loaded (filament tip has not reached the end of tube) to initiate the feeding action.

 

About support:

I set the top Z distance of the supports to 0.14-0.15 for a better support surface

However, removal can be a bit difficult, especially patterns on the upper layer are quite delicate

 

It is recommended to push away the edge supports first

Then, carefully pry open the internal supports with a thin rod or similar tool. It's need a bit of patience

 

At the end, I wish every S.T.A.R.S. member can print their own zombies!!