November 13, 2025
Description
Free for personal printing use only.
Exclusive monthly projects and commercial license available at Patreon.com/StrataPrints — your support keeps new designs coming! Check out the Beru project available EXCLUSIVELY on Patreon below!
Project: Afro Samurai.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 188.03x235mm in size
You may print at higher layer heights below the Base Thickness of 1.04mm
The Max allowed Thickness is 3.2mm and the Actual Thickness is 2.88mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#545454 PLA BambuLab Basic Dark Gray Transmission Distance: 0.6
#808080 PLA BambuLab Basic Gray Transmission Distance: 0.1
#de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#ffffff PLA BambuLab Matte Ivory White Transmission Distance: 3.5
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #16 (1.36mm) swap to Dark Gray
At layer #21 (1.76mm) swap to Gray
At layer #25 (2.08mm) swap to Scarlet Red
At layer #29 (2.4mm) swap to Yellow
Border Only Colors from here until the end.
At layer #31 (2.56mm) swap to Ivory White
This slider is set higher than the mesh depth. It is not affecting your final mesh. Consider removing it.
At layer #45 (3.68mm) swap to Black for the rest.
License:
Standard Digital File License
Strata Prints
