panel led diy

 DIY Led Panel that can be printed as one piece on any 220x220 printer bed. I decided to make it because I lacked enough light sources for making my videos. Now I use this panel every time I need to record something and even though it consumes just 25W it is just as bright if not brighter than my 85W softbox lamp.To build it you will need just a thin piece of steel and some LED strips so the total cost is pretty low for such a bright light source. For my panel I used-1x 5m LED SMD5630 spool ( I used just 9-20cm strips so the total length is 1.8m, but I don't think you can get smaller spools. You can stick more strips but keep in mind that it will generate more heat as well) 3D MODEL ONLY -1x 180x200mm thin steel sheet (Download .STEP file for more precise dimensions)-Some electric wires and power switch-Some M3 screws-3D Printed Case ( I used White PETG) If you want you can also add a PlexiGlass panel with the cover or print a tripod adapter. For more details check out my video about LED Panels