The Circut Mat Ramp was created due to the limited space behind my wife's Cricut Maker 3. The mat would run into a power strip that located behind it. She can now use her Cricut without having to worry about the limited space.
Assembly Instructions.
- There are 3 ramps and 4 connectors.
- The side of the connector with the smaller dovetail connects to middle ramp.
- The side of the connector with the larger dovetail connects to the outside ramps.
- Seat the connectors all the way until they seat up against the ramps.
- The connectors are a snug slip fit and can slip on and off for easy assembly and disassembly, yet tight enough to have a sturdy connection. No glue required.
- Optional- you can apply some anti-slip feet to the bottom of the ramps to have a more secure footing on your work surface.
Size - The complete Ramp Assembly measures
- Height - 125 mm
- Width - 305 mm
- Depth- 165 mm
- work surface to the bottom of the ramp - 28mm
The Cricut Mat Ramp was designed for the Cricut Maker 3, but people have reported in the comments that it has been successfully used with the following machines.
- Cricut Maker 4
- Cricut Explore 3
- Cricut Explore 5
- Brother Scan n Cut
- Cameo Alpha 5
- Cameo 5 Plus (commentor said they used 1 and a half of another Cricut Mat Ramp to make it long enough to work)
Please leave a comment if you print it out and try it on another machine.
Ant_6883
