Flexi Rhino Print in Place

This fully articulated baby rhinoceros wiggles, poses, and steals hearts straight off the build plate – no assembly required.

1. Multi-color version (AMS-friendly) – Body + Black eyes (you can paint the horn in Bambu Studio or by hand after printing).
2. Single-color version (no AMS needed) – Prints entirely in one filament – Paint after printing) – Horn/eyes can be painted by hand.

• 0.2 mm layer height
• 3 walls, 10% infill
• Supports: Yes – set supports on build plate only or use the print profile attached

⚠️ Scaling down much smaller than the provided size risks fusing the joints – print smaller at your own risk!