BlockBites – Christmas Tree

Meet the BlockBites Christmas Tree — a compact, charming, brick-inspired ornament perfect for holiday decorating, gifting, or collecting.

This model follows the signature BlockBites design style:
✔ clean blocky geometry
✔ minimal pieces for easy assembly
✔ fast print time
✔ optional ornament loop for hanging
✔ designed to match the scale of all other BlockBites figures

 

Comes in two variants:

🎄 Ornament Version (with hanging loop)
🎄 Display Version (no loop, clean top)

The BlockBites series is expanding — more Christmas characters and themed mini-builds will be released soon!

🖨 Recommended Print Settings

• Printer: Any FDM printer
• Layer Height: 0.16–0.20 mm
• Nozzle:
  • 0.4 mm (standard)
  • 0.2 mm if you want sharper grooves or seams
• Supports: Not required (For the ball ornaments, a raft might be needed)
• Infill: 10–15%

🎨 Multi-Colour Printing (No AMS Needed)

This model is split into separate pieces so you can:
✔ Print green tree pieces together
✔ Print star separately in yellow
✔ Print base separately in brown

🛠 Assembly

• Most pieces press-fit together, but depending on your slicer and filament, a tiny amount of super glue may help secure certain parts.
• IMPORTANT: Be careful not to twist or over-flex the parts during assembly — the small connecting tabs may snap if forced.
• Designed with tolerances optimised for Bambu printers and Bambu PLA.
  • Tolerances may vary for other printers or filament types, so fit may be slightly looser or tighter.
• Ornament loop can be reinforced with 2–3 perimeters.

Boost MeEnjoying the design? Please give it a boost to support my work! ⭐✨