Flight Fins for Onewheel PINT/XR/GT/ADV

If you need compatible FF fenders, purchase directly from flight fins, or browse my designs. I have models for the Pint, XR, GT and ADV.

 

Print in TPU only…the softer, the better. Use 15-20% infill. No supports required.

 

Two mounted fins require the following screws/nuts:

• 4x - #12 5/8" Screw
• 4x - #12 1" Screw
• 8x - #12 KEPS Lock Nuts

Included in the project file are optional extenders:

• You will need to MIRROR one of the extenders in bambu slicer if printing both.
• You will need longer screws for these to work.

Boost MeIf possible, please boost, like and rate this model to show your appreciation and support.