10" rack TP-Link 8 port LS108GP switch shelf

This shelf is designed for the TP-Link LS108GP 8-port switch, but should also fit other devices with the same dimensions (158 × 99 × 25 mm).

 

PSA: Let the print cool fully before removing it from the build plate — pulling it off too early can cause warping.

 

“Your switch is upside down in the photo”

Yep, that’s intentional as it means I don't need to twist the cables when they connect to the rack keystones. The shelf is fully reversible, so you can use it in either orientation you choose.

 

Features

• Through-holes under the shelf allows you secure the switch to the shelf with M3 screws, so it won't slide out easily/unexpectedly

Additional hardware (optional)

• M3 x 8-10mm (my photo shows 16mm, too long and all I had on hand, but they don't appear to intefere with other shelves)
• M3 washer (an optional … in these optionals)
• M3 nut

Rack info

I use the Modular 10 server rack (link to rack). The faceplate thickness is 2.6mm to match that rack's design

 

 

Boost MeIf you found this useful and have a boost to spare, I'd appreciate it 👍