Fallout MTG Mini Nuke Deck Box

Boost MeIf you like this model please consider boosting it. Thank you!

I designed an all screw version thats alittle cleaner design wise. You can find V2 of this model here. https://makerworld.com/en/models/444126#profileId-350360

 

This is a mini nuke deck box. The Deck Cavity is 76x76x100mm. This should fit most decks even double sleeved decks. The top screws on to the dice holder and the side holder sits on top of the deck box. I designed this to be supportfree. There is a long bridge that will be needed on the dice holder. Let me know if you would like to see a version with magnets.

 

Update:

Added an A1 Mini Version. Everything is the same except the I split the Main Part into 2 pieces and you can screw them together.

 

 

Here is a print from a person who downloaded it.

 

Check out the mini nuke life counter as well. https://makerworld.com/en/models/484651#profileId-397051

 

Update:

I received interest in a magnet version. I have added that and a single sleeved and a double sleeved version. Below are the magnets I picked to fit this box. let me know if you need different sizes and I will try and add them.

I have not tested these magnets but I left a 3.5mm space for each one so they should fit fine.

 

https://www.amazon.com/Magnets-Refrigerator-Neodymium-Whiteboard-Kitchen/dp/B0CCXYF5TR/ref=sr_1_3?crid=2ZXC110BQ5KN8&dib=eyJ2IjoiMSJ9.7P__e0s3x6c8j41JiiKsEnQb7_Q6kScPEJdM9gNIk0HGESF_ejojzDVlv_BJfQjH3fFztw4HNtLeiaIk_Idv8RAYN6TJ6wtB6tW8U8JJFD4Jth8o8tf1mkryH8KQKFmfIsClnGM2d4UjFg-wm3TsNWenui5jFxGNKwZmOP1PyTlFprlznnf-m5rcwwYxTSIrMzoySd0TW-G3fPe7u4CtNSxnaM5LUXEbDP3tKjVapdc.zqoVrbeK-gbFNy5q3FNDf8NNvku96oJ-_FOXc_dKlIM&dib_tag=se&keywords=3x3%2Bmagnets&qid=1709666170&sprefix=3x3%2Bmagnets%2Caps%2C115&sr=8-3&th=1

 

Check out my other deck boxes:

https://makerworld.com/en/models/382812#profileId-284220

 

If you would like to sell physical prints of this model, please join my commercial license tier and become a ThatCadCousin https://thangs.com/designer/thatcaddad