Woodpeckers Thin Rip Guide French Cleat Storage

I created this french cleat holder for the Woodpeckers Thin Rip Guide. Wanted to make it strong enough while minimizing material usage. 

 

My cleats happen to be 2.75" (with 1/8" of the point cut off) on the long side. I created a little pin to lock the holder on the cleat. I find this is not necessary - but it could help if the cleat gets bumped. If your cleats are a different size, You can drill a hole in the proper place and use a dowel.

 

My cleats are ¾" plywood. so the hook will be a little long if you use 0.5" ply.

Boost MePlease consider giving me a boost. It would help get more filament for the multiple versions I usually work through to finalize a design. THANKS!