December 26, 2025
Description
Check out my new account @fuzzin. I'll be releasing figurines that have fuzzy skin with that account:
------------------------------------------------
My previous ribbed hangers have been well-received. After seeing the over door hook by @3dprintconst I decided to make one myself in my usual ribbed style. There are 18 versions currently ranging from 5mm to 45mm with an additional 0.8mm clearance. So if the plate says “35mm door”, the opening is 35.8mm wide. There is a 17.6mm flat surface at the back. You can install double-sided tape, non-slip feet, or felt for stability there. Some of the hooks are designed for doors, some are designed for shower walls which tend to be much thinner.
Boost MeIf you like my work, you can help me to continue by giving a boost!Do you want to sell 3D prints of my designs or support my work? Join my commercial membership on Patreon 🎉
Before printing, make sure that your built plate is clean. The model has thin sections which will be printed perfectly as long as you have a clean build plate. If you don't trust the cleanliness of you build plate, please activate brim.
The looks of it can be deceiving but it can carry quite a lot of weight. I personally tested the 13.5mm wide version with a 10 kg (20 pounds) bag on a single hook and it held strong. Carrying capacity will depend on the wideness of the section that goes over the door and the material you are printing with of course.
Check out my other models:
Universal Table Hanger | Bag Hanger
Wall Hook | Coat Hanger | Towel Rack
License:
Standard Digital File License