1. Most of the uploaded models have no supports or optimized supports. Beginner-friendly one-click printing from your phone.
If there are supports, use modeling pliers to remove them little by little If you want to assemble use 502 super glue.

2. The images you see are actual photos I uploaded after successful printing myself.
For more actual detail photos of the model you can scroll down from the main image and click to enlarge and view details.

3. Go to my homepage where more models can be chosen for download.

0.4 nozzle. 0.2 or 0.16 layer height is fine.
For better results, you can use a smaller nozzle and a lower layer height.
Try not to modify print parameters you can directly use one-click printing from your phone.

4. The most common reason for beginner print failure is poor first layer adhesion, it is recommended to wash the build plate with dish soap before printing.

Thanks for boosting thanks for boosting I will try to upload more models for everyone to download .

5. You may not share, sublicense, sell, rent, host, transfer, or distribute digital or 3D printed versions of this work, or any other digital or physical format derivative works of this work in any way (including but not limited to remixes of this item, and hosting on other digital platforms). Without permission, these items may not be used for commercial purposes in any way.

博物架 写实 微缩 娃娃窝 一体打印 新手友好 摆件 办公室 桌面 玩具 礼物 儿童

博物架 写实 微缩 娃娃窝 一体打印 新手友好 摆件 办公室 桌面 玩具 礼物 儿童

Related Models

博物架写实微缩娃娃窝一体打印新手友好摆件办公室桌面玩具礼物儿童

博物架写实微缩娃娃窝一体打印新手友好摆件办公室桌面玩具礼物儿童