Fazua Bottom Bracket Cover

I created the Fazua Bottom bracket cover to protect the connectors at the bottom of my bike from rain & dirt. 

Printed in PLA, although you could print in PETG for it to become more hard wearing. Hole are added to let any water out that may get in there. Also if you have any sort of chip for off road use, this would also fit in here. 

Tested on my Fazua Ride50 bottom bracket. You have to remove 2 bolts from bottom inline with the holes on the cover. Then use 2 x M4 30mm screw head bolts to attach it.  

If you like my print and find it useful, id appreciate a boost :-). Thank you