Legion Go Case with SSD Enclosure

So this is case can hold a ssd enclosure for the legion go so you don't have to mess with insides. This case allows the usb to used from top or bottom. You may need to mess with the rotation of the case or if you like the case you have you can just glue the ssd enclosure onto it. I did this originally then wanted to mess with it to make it fixed. The glued version is still running strong. 

So if you want one with the deckmate attachment it is also in this file. In one of the pictures the highlighted section of the deckmate is the section to glue. DO NOT GLUE the whole thing or it cannot be squeezed. The deckmate version that is attached to this file DOES NOT need a spring. It can be used from PETG.  

The enclosure for the ssd is tight there is a very tiny gap on the inside to allow for better air flow. But there's no worry for it falling out because it is a tight fit. I will be modifying this as i go further on. The amount of testing I did on this is insane and the amount of changing from the start was a pain. but I welcome people to recommend changes. 

The guy who remixed the deckmate attachment with no spring is here. https://www.printables.com/model/415558-springless-deckmate

The cases used are here https://makerworld.com/en/models/1006268-legion-go-case-with-deckmate-grip?from=search#profileId-984744 and here https://makerworld.com/en/models/1656497-legion-go-jsaux-cover-version-2?from=search#profileId-1752015

I have printed both those cases and they work great. All I did was make the supports easily removable and added the enclosures. If you like this mod please give me a boost. I also made it so the fans can still be used and have no issues. I have tested these for days and they work great.