Parametric Wall Holder (Customizable)

Boost MeIf this holder saved you from the “where’s the remote?!” daily drama… boost me 😄🚀

 

 

Parametric Universal Remote / Phone Holder (Wall Mount) – Custom Size + Screw Presets

 

Tired of remotes and phones floating around the house? This is a parametric wall-mounted holder you can customize to fit almost anything: TV remotes, AC remotes, phones (with cases), small gadgets, even flashlights.

✅ Fully customizable (no more “almost fits”)
✅ Mount-ready with countersunk screw presets (M3/M4/M5/M6)
✅ Comfortable and customizable thumb-scoop for quick grab
✅ Clean minimalist design – looks great in living room, bedroom, office, or garage

Customize parameters (defaults shown)

Inside size (mm):

• Inside_Width (W) = 50
• Inside_Depth (D) = 20
• Inside_Height (H) = 90

Ergonomics:

• Tilt_Angle = 5°
• Thumb_Scoop_Depth = 50
• Thumb_Scoop_Width = 15

Strength:

• Wall_Thickness = 2.5

Mounting (mm):

• Pitch_Between_Screw = 25
• Screw_distance_from_edge = 10

Countersunk screws (90°):

• Hole_D / CSK_D auto-style values (example shown for M3)
• CSK_Depth is calculated with a +0.2 mm print allowance to help the screw head sit flush.

Print recommendations

• Material: PLA / PLA+ (PETG if you expect heat / heavy use)
• Layer height: 0.2mm
• Walls: 3–4 perimeters
• Infill: 15–20%
• Supports: Not required (depending on your printer bridging, you may enable “support for holes only”)

Tips for best fit

• If it’s too tight: increase Inside_Width by +0.5 to +1.0mm
• For thick phone cases: increase Inside_Depth by +2 to +5mm
• For easier grabbing: increase Thumb_Scoop_Width / Depth

Note:

ISO Flat-head (90°) — clearance holes

• M3: Hole_D 3.4 mm, CSK_D 6.6 mm
• M4: Hole_D 4.5 mm, CSK_D 8.4 mm
• M5: Hole_D 5.5 mm, CSK_D 10.4 mm
• M6: Hole_D 6.6 mm, CSK_D 12.6 mm

Boost MeIt will really help me :(

 

 

Candy Wrapper Box

 

 

🔥 AnySlot Wheel (Pick any number of slots) 

 

 

🏠 Parametric Wall Remote Holder (Customizable) 

 

 

Boo-nchy - Ghost Benchy (Halloween special)

 

 

 

Jack-O-Benchy Lantern (Pumpkin Benchy)

 

✨ Full collection / follow me