Standard Size Double-Nine 55 Piece Domino Set

Boost MeLike what you see? Boost this model for free!

This is version 2 of my Double-Nine Domino Set — now cleaner, crisper, and even more satisfying to play. I learned a lot from version 1, so this one should be easier and more customizable. I couldn't find a double-9 domino set that I could print so I made my own!

 

No AMS/MMU required: this set uses a single manual color change for high-contrast pips. Pause, swap filament once, and resume. 

NOTE: Profiles are already configured with the pause, if you want to change it, see instructions below under manual color change steps.

What’s included

• 55 tiles (double-nine set) ~52.5mm x 26mm x 10mm
• Two plates (easy batch printing) on 256mm bed
• High-contrast pips for quick readability
• V2 improvements: cleaner edges, more consistent finish, easier-to-print workflow

Print notes (recommended)

• Nozzle: 0.4mm
• Layer height: 0.28mm for speed
• Walls/Infill: 2 walls, 10–15% infill
• Supports: none
• Plate: Smooth / Super Tack for a cleaner face or back (Textured is fine too)

Tested on A1 Mini and P1S - both print fabulously

• P1S requires 2 plates to print all 55 pieces
• A1 Mini requires 4 plates to print all 55 pieces

Manual color change steps (Bambu Studio) - Profiles are already configured with pause

1. Slice the plate
2. Add Pause/Filament Change at Layer 30 (for face-up print) - (Layer 8 for face-down print)
3. Swap filament
4. Resume printing

Tip: Want the opposite face to be smoother? 

Print face-down and move the swap layer to change which side gets the cleanest finish.

 

 

Check out version 1 here:

https://makerworld.com/en/models/2000394-mini-classic-double-nine-dominoes-55-piece-set#profileId-2153817

I am creating a box for them to go in soon! Follow me to stay updated!