Wolfcraft TE mobil Adapter for Bosch GSR 12V

This 3D-printed adapter is made specifically to mount a Bosch GSR 12V cordless drill/driver (e.g., GSR 12V-15) onto the wolfcraft TE mobil (Mobile Drill Stand / Mobiler Bohrständer), turning your compact drill into a small, accurate drill-press setup. It keeps the tool seated and aligned on the stand so you can drill straighter holes with better control—without improvising straps, shims, or wobbly clamps.

Key Features

• Tool-Specific Fit: Shaped to match the Bosch GSR 12V housing for a snug, repeatable mount.
• Stable Alignment: Centers the drill on the TE mobil carriage to reduce twisting and side play during drilling.
• Quick Mounting: Designed to install using the drill stand’s existing clamping/holding points for fast tool changes.
• Clearance-Friendly Geometry: Offset/contoured design keeps room for the battery and grip area so the drill remains usable.
• Print-in-Place Accessories: Includes matching caps/knobs (as separate parts) for a cleaner, safer, more finished setup.

Usage Benefits

Once installed, you get a much more controlled drilling experience for woodworking, plastics, and light metal work—perfect for dowel holes, pilot holes, and repetitive drilling where hand-drilling feels like gambling. It’s especially handy in small workshops where a full-size drill press would be overkill.

Printing Tips

Print in PETG (recommended) or tough PLA for rigidity; use 0.2 mm layer height, 4–5 perimeters, and 30–50% infill. Add supports only where needed (typically under internal overhangs), then test-fit on your TE mobil and the drill—light sanding on contact areas can make the fit feel “factory.” For safety, remove the battery while mounting and always make sure the drill is fully secured before drilling.

Links:

Wolfcraft Tecmobil

Bosch GSR 12V-15

Bosch GBA 12V 3.0Ah

Bosch GBA 12V 2.0Ah