Wall Hole Plug Generator - Patch any size hole!

🔧 FILL ANY WALL HOLE - CUSTOM SIZE GENERATOR

Print a perfect-fit plug for any circular hole in your drywall or plasterboard. 
Just measure, customize, print, and press fit!

━━━━━━━━━━━━━━━━━━━━━━
📝 GENERAL INSTRUCTIONS / HOW TO USE MODEL:

1. Measure your hole diameter

2. Measure the thickness of the wall / depth of hole you're looking to patch
3. Click to edit the right version for you - Metric or Imperial

4. Adjust parameters in customizer
5. Download and print!

6. Press plug into hole until it clicks
7. Optional: fill/sand/paint face for invisible repair

━━━━━━━━━━━━━━━━
⚙️ CUSTOMIZABLE PARAMETERS

- Wall hole diameter
- Wall thickness (standard drywall: 10-13mm or  3/8 - 5/8" in freedom units)
- Number of flex legs (2-8). 3 works well by default. 
- front face thickness (what covers the hole). Thinner front results in a more subtle cover. 

TWO VERSIONS INCLUDED:

• Metric - dimensions in mm (15-200mm holes)
• Imperial - dimensions in inches with fractional sliders (1/2" to 8" holes)

━━━━━━━━━━
🖨️ RECOMMENDED PRINT SETTINGS:

- Material: Tested and works well with PLA and PETG - may need to adjust plug wall thickness for stiffer materials. 
- Orientation: Face plate DOWN on build plate
- Supports: None needed
- Infill: 15-50%
- Layer height: 0.2mm works well. 

- Build plate: I recommend the standard Textured PEI plate to match the surface finish of painted walls. 

- Seam lines: can be set to random if you are operating with tight tolerances.

This took me ages to make but was a fun exercise trying to figure out how to make editable models. Please let me know if this was helpful for you!