Small Keychain Camera photo holder

Small camera-shaped keychain in 3 pieces with movable tray. To assemble: position the back half of the casing on a flat surface and place the tray in the inner slot, next align the holes of the upper half with the pegs on the bottom half and press firmly. The assembly should be capable of holding itself in place, if not, glue the casing toghether.  

This keychain is perfect for holding miniature sized photos of you or your loved ones. The project was designed for a friend who gifted it on valentines day!

Other info:

The tray offers a 26,6 x 34,5mm area which can accomodate a slightly trimmed passport photo (i.e. the ones from photo booths). Its upper notch is designed to allow for easy handiling and removal of old photos. 

Adding a small amount of glue on the rear of photo assures the best results.