Clean your pellet stove efficiently and without dust/ash clouds!
Every pellet stove owner knows the struggle: when cleaning the combustion chamber or the heat exchangers with a brush, you often stir up more fine ash than you remove. This adapter solves that problem by combining mechanical cleaning with immediate suction.
This adapter connects a standard 80mm nylon cleaning brush directly to the aluminum pipe of your ash vacuum. As you scrub away deposits, the vacuum sucks them up instantly at the source.
✨ Key Features
- Dust-Free Cleaning: Prevents fine ash dust from escaping into your living room.
- Perfect Fit: Designed specifically for the aluminum tube of the Einhell TC-AV 1718 D (and similar models).
- Direct Connection: Features an integrated thread to securely hold the cleaning brush.
- Easy Printing: Designed to be printed without supports.
🔧 Compatibility & Hardware
- Vacuum Side: Fits suction tubes with an outer diameter of 38.5 mm (Tested with Einhell TC-AV 1718 D).
- Brush Side: Designed for an 80mm Nylon Brush with a threaded connection.
- Recommended Brush: HANSA 80mm Amazon-Ref-Link
- brush specific thread size is M12
🛠️ Assembly & Usage
- Screw the nylon brush into the threaded opening of the printed adapter.
- Slide the adapter onto the aluminum tube of your ash vacuum (38.5mm).
- Turn on the vacuum and clean your stove pipes/heat exchangers.
- If the frition of the 80mm ist to high, just use a siccor to adjust the widht (in my case 50mm for the sides)
⚠️ Safety Warning
- Wait for the stove to cool down completely! Never use 3D printed parts inside a hot stove.
- Ensure the brush is screwed in tightly so it does not detach inside the stove pipe.
Boost MeHappy Printing!
If this model helps keep your home clean, please leave a like and a boost! 🚀
Leinich
