Battery Grid Pack & Storage Rack (Standard Types)

This is a fully customizable model designed to create the perfect battery holder for any need. 

Whether you are assembling battery packs for DIY projects or looking for a clean way to organize batteries in your drawer, this model has you covered!

WARNING:
The default tolerance is fine if you're printing with TPU. 

If you're using PLA or PETG, you'll need to increase the tolerance, otherwise you risk damaging the battery's thermal jacket.

I always recommend generating and printing a small grid and testing the tolerances to avoid problems.

Key Features

• Total Customization: Adjust the number of rows and columns (NxM).
• Preset Battery Sizes: Quick selection for 21700, 18650, AA, AAA, C (LR14), D (LR20), and more.
• Custom Diameter: Use the "Custom" option to fit any cylindrical object.
• Structural Frame: Optional outer reinforcement for a professional and sturdy look.
• Dual Mode:
  • Open Grid: Perfect for battery pack welding and airflow.
  • Closed Rack: Enable the Bottom Plate to create a solid storage tray.

How to Customize

You can use the Bambu Studio / MakerWorld Customizer to adjust the following:

1. Grid Dimensions

• X & Y Count: Set how many batteries you want in each direction.
• Height: Choose the height of the holder. Low for welding (10-15mm), high for storage.
• Ring Thickness: Adjust the wall thickness of the battery slots.

2. Battery Parameters

• Battery Type: Select your battery from the list. It uses accurate nominal diameters.
• Tolerance: Very important! Add a small gap (e.g. deafult is 0.2mm for TPU) so batteries slide in perfectly.
• Custom Diameter: If your battery isn't listed, set the type to "Custom" and type the exact diameter in millimeters.

3. Outer Frame & Bottom

• Show Frame: Adds a solid perimeter around the grid, making it much stronger.
• Show Bottom: If enabled, it adds a floor to the holder. Ideal for drawer organizers so batteries don't fall through.

See my other models!!!