DIY 3D Printed Blower

Summary

Design A DIY Air blower works on 12 v RS 775 Motor.
All parts used in the design makes with Ender-3 3DPrinter.
Use Two M2 screws for assembling the motor and Motor mount.
Apply Little force on the impeller to Fit on Shaft of Motor.
Use 4 x M2 screws to assemble the motor mount and casing.

When Apply 12v 2Amp Power it works very well and Blow All dust away.

Buy DC motor from here

https://www.amazon.in/RS-775-12-Volt-DC-Motor/dp/B071FW71FT

Checkout Making of Blower here.

https://youtu.be/t2ccFDeAyb0

If you like it Give me Tip For my Next Project.
If my design helps you to complete your project please Buy me a coffee.

https://paypal.me/daxpatel34567

Thank you.
Enjoy.

Print Settings

Printer Brand: 

Creality

Printer:                      

Ender 3

Rafts:                      

No

Supports:                      

Yes

Resolution:                      

0.2

Infill:                      

25

                                                    Filament: Augmented 3di PLA                White                    
                        

Notes:                     

Use speed setting Between 40 to 50mm/sec.
Support Distance is 4mm between two lines.
Use Brim As well.

Post-Printing

For assembly

For assembly, you need some M2 Bolt and Nut for join Casing And Need two M3x 5 Bolts for motor Mount.Motor Mount and Impeller will 3d printed .you need Motor, Pipe and Some small Nu-Bolt for assembly.

How I Designed This

Design in fusion360 and 3D Print with Ender-3.