Sig Sauer P250 Toy Blowback Model Pistol

Someone suggested i upload the model here so here it is. (also this is my first time using a makerworld account so forgive me for not using all of its features when publishing a model)

Model features:

• Blowback up to 35mm
• Field strip pin making field stripping accurate  to the real Sig
• Tilting barrel for more realisim and oddly in high demand after making my last model
• Pivoting trigger making trigger pull lighter instead of the more common sliding trigger
• Able to be fully dissasembled allowing for easy repairs
• New BB (blowback) housing system makes the BB unit is seperate from the frame
• Return spring is now a spring instead of rubberbands (note that the bb unit still needs rubber bands)

Again this model does require experience with mechanical concepts and patience but unlike my previous model this was made with user assembly in mind but then again i cannot guarantee this is easy to assemble

Note: The orientation is already set to a recommended rotaion, if u wanna u can rotate it differently if u think your way is better

Print settings: (printed on Ender 3 V2) fit the settings to your printer if u know your printer well

• Quality: 0.2mm
• Nozzel: 0.4mm
• Infill: 15% (but u might want to make the [yellow parts] stronger which is seen in the video)
• Support: Tree type at 70 degrees (for all parts)
• Wall line count: 3
• Filament: PLA+
• Bed adhesion: Brim (for all parts)

Assembly tutorial: (parts list and links are included in the description of the tutorial)