ColecoVision Display Stand - 35° incline

I created these 35 degree angled stands for each of the retro computers and game systems in my collection. For me, this is the ideal angle to emphasize each device as it is displayed on the shelf of an IKEA Billy tall bookcase unit.

 

The ColecoVision stand has three legs due to the non-symmetrical design of the front of the system. The middle leg has cutouts for braces on both sides, so supports need to be enabled. The complete stand set is made up of the left, middle, and right leg, and 4 cross braces. All individual STL files are included. I've also provided a center stand without cutouts.

 

If you print one, please post a make, I'd love to see it.

Boost MeI am working on matching stands for other vintage retro systems of the era. Consider giving me a Boost if you like what you see.

My settings:

 

Printer: Bambu Lab X1C
Material: PLA
Build plate: Textured PEI
Nozzle size: 0.4mm
Layer Height: 0.2mm
Walls: 2
Top/Bottom Layers: 5 (1mm)
Infill: 15% Gyroid
Brims: Not needed
Supports: Enable for the middle leg