Eye of the Universe - Merged

Eye of the Universe Wall Art from the game Outer Wilds made for using with command strips. Modified to be Merged between the Nomai And Owlk Designs as well as Split models for people without AMS

Original Version: https://makerworld.com/en/models/1139244

How to Print The Split Models:
    Select Slice Plate > Add a Pause on Layer 17 > Select Print Plate > Select External Spool > 

    Load Black Spool > Print > On Pause Unload Spool  > Load Colored Spool > Continue Print

Changes I Made:
1. Split both models and merged them into one

2. Changed colors half way up to save on Waste and make it easier to print without an AMS.

     *My Glow PLA is Generic The Bambu Green works but they don't sell a PLA Purple*

3. Made Split model for printing without an AMS requiring only one Filament swap each While hiding the seem.

4. Removed the Screw hole opting for using a Command Strip Instead + Glue for the Split Version

For non Glow options i Recommend Matte PLA Lilac Purple (11700) and Basic PLA Bambu Green (10501)