MembershipWant a commercial license to sell/distribute physical prints of this design? Join my CORE Membership to gain legal rights to all of my current and future original models. Please note that this model is for personal use only unless you have an active commercial subscription. Click "Join" to view all membership details and start selling today.
This is a minimalist, single-body Everyday Carry (EDC) Tray designed to keep your pockets empty and your essentials organized. I designed this with a focus on clean lines and a low profile, making it a perfect fit for a nightstand, entryway table, or a modern kitchen counter.
The goal was to create a sleek, "one-piece" aesthetic that feels premium while remaining entirely functional for daily use.
Design Details
- Spacious Layout: Large enough to hold a wallet, keys, watch, pen, and a pocket knife or multitool without feeling cluttered.
- Refined Geometry: Features smoothed internal corners and a slight chamfer on the top edge to make retrieving small items (like coins or rings) easier.
- Hardware-Free: A monolithic, single-print design that requires no assembly or secondary parts.
- Anti-Slip Texture: The base is designed to be sturdy, and I’ve included subtle internal floor texture to prevent items from sliding around.
- Material: Best printed in PETG for a slight satin sheen and high durability, though matte PLA is excellent for that ultra-clean, stealth-black look.
Parameters
The source file is designed so that the parameters can be directly edited in Fusion 360. If you need a custom size, you can simply open the "Change Parameters" table and modify the following:
- Length & Width: Change the overall footprint of the tray.
- Height: Adjust the depth of the tray walls.
- Thickness: Control the wall and floor thickness for a heavier or lighter feel.
- Corner Radius: Adjust how rounded the outer and inner corners appear.
- Note: I am happy to publish and export specific dimensions or variations for anyone who doesn't have access to CAD software or a slicer. Just leave a comment with your requested specs!
Print Settings
- Filament: PLA, PLA+, or PETG
- Supports: None. The walls are designed with a vertical orientation that prints perfectly clean without any support material.
- Walls: 3–4 (Adding extra walls gives the tray a satisfying weight and ensures it feels solid).
- Infill: 10–15% (Gyroid is my preferred).
- Layer Height: 0.2mm for a balance of speed and detail.
Assembly
This is a Print-in-Place design. No assembly is required. Once the print is finished, simply remove it from the build plate, and it is ready to use. If you want a more premium feel, you can add small rubber adhesive feet to the bottom to keep it from moving on polished surfaces.
ziah
