SLIDING Screen Dust Cover for P2S - EASY

VSA

3D GO

SLIDING Screen Dust Cover for P2S - EASY

VSA

January 30, 2026

Description Comments Tags

Description

This sliding display dust cover is designed to protect the screen of the Bambu Lab P2S from dust, debris, and accidental splashes when not in use.

The side-sliding mechanism allows you to easily cover or uncover the display by sliding the cover sideways, without removing any parts. This provides quick access to the screen while keeping it protected during idle time or long prints.

There are print profiles for PLA, PETG and ABS !

Instructions :

Remove the supports from the rails with a little sharp tool, easy to remove but there are some in all the rails. Be careful !

Slide the slider into the notch on the body. You have to force a little to get it through with the little edge, this is normal.

Clip the assembly onto the screen, easier with two hands. The support edges are on each side of the body.

And it's done !

Boost MeThanks for the support if you like my creation!

Some other of my projects :

USB Port Dust Cover Plug for P2S/P1S

Rectangular Hygrometer Door Mount

Desiccant scoop

License: