Splatoon Inkling Girl Hueforge Orange Nintendo

Project: Inkling.hfp

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 245x245mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:  (* = Owned)
    #0f1011 * PLA eSun Black  Transmission Distance: 0.6
    #91202b * PLA eSun Fire Engine Red  Transmission Distance: 5
    #ff6a00 * PLA eSun Orange  Transmission Distance: 8
    #ff9016    PLA BambuLab Basic Pumpkin Orange  Transmission Distance: 5.5
    #e7ceb5 * PLA BambuLab Basic Beige  Transmission Distance: 8
    #e1e4e7 * PLA eSun Cool White  Transmission Distance: 2
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #10 (0.88mm) swap to Fire Engine Red
    At layer #13 (1.12mm) swap to Orange
    At layer #17 (1.44mm) swap to Pumpkin Orange
    At layer #21 (1.76mm) swap to Beige
    At layer #24 (2mm) swap to Cool White

Border Only Colors from here until the end.
    At layer #28 (2.32mm) swap to Orange for the rest.