Stitch Multicolor Piggy Bank

Keep your savings safe with this adorable, multicolor Stitch-inspired piggy bank! This model captures Stitch’s shy expression and is designed with a modular structure for easy printing and assembly.

📂 Files Included

Front Faceplate: Multicolor Stitch character.
Middle Body: Features a top coin slot and a threaded bottom opening.
Back Faceplate: Two versions included (Blank & Text).
Screw Plug: For easy money removal at the bottom.
Project File (.3mf): Pre-configured and colored for immediate printing.

🖨 Printing Recommendations
Layer Height: 0.2mm
Wall Generator: Arachne mode is highly recommended to capture the fine lines of the face.
Orientation: The main body should be printed laying on its side.
Supports:

Required: Only for the body piece (to support the internal coin slot and the bottom screw hole).Setting: I recommend Normal Snug supports, though standard supports will also work.

🛠 Assembly Instructions
You will need: Super glue (CA glue).

Prep: Ensure all support material is removed from the body piece.Glue: Apply a small amount of super glue to the inner slots of the front and back faceplates.
Connect: Slot the middle body piece into the faceplates. Press firmly to secure the bond.
Finish: Once the glue is dry, simply screw the threaded plug into the bottom hole.