Double Wall Hook | Coat Hanger | Towel Rack

Check out my newly released models:

Mini Bag Clip v2

Compact Phone Stand

-----------------------------------------------------

My wall hook with its ribbed design has been well-received and some have asked for a double hook version. Here it is. This is a multi-purpose wall hook. It can be used as a coat hanger, towel hanger, bag hook etc. If you are planning to use heavy items, I would highly recommend the screw mount version.

Boost MeI put a lot of time and effort into designing and testing my models. If you like my work, give it a boost to help me continue.

Do you want to sell 3D prints of my designs or support my work? Join my commercial membership on Patreon 🎉

There are 2 versions:

1- Double-sided Tape Version: 

There is a slot on the back on this version. The slot accepts maximum 17mm wide tape (smaller also works). The slot is textured. Thick & transparent tape will stick significantly better to a textured surface as opposed to a smooth one with PLA, PETG etc. I've tested this very extensively across 5 different models which have a total print count of 30,000+. I would highly recommend thick & transparent double-sided tape (sometimes has red lining) because foamy ones tend to leave residue, and thin ones are not strong enough: Link to the recommended double-sided tape.

2- Screw Mount Version:

This one comes in two pieces: The hanger itself and the mount. The mount has slots for 2 screws. These have 8.5mm diameter entry and 4.4mm exit to fit various screws. Before screwing the mount in, make sure the parts fit together. The fit is quite tight to prevent wobble. If it's too tight with your particular printer & filament, you can sand down the little nibs of the mount. Before mounting it to the wall, make sure to insert and remove it a couple of times to make it fit smoother. If you are having a hard time removing the mount from the hanger, just push it out with a screw driver or something similar. There are slots for doing exactly that.

 

Dimensions: 21.6 × 35.6 × 118mm (X × Y × Z)

 

-----------------------------------------------------------

Check out my other models:

Belt Hanger | Belt Hook

Clothes Hanger Connector Hook

Press-to-Seal Bag Clip

Universal Table Hanger | Bag Hanger

S Hook | Coat & Bag Hook

Over the Door Hook

Wall Hook | Coat Hanger | Towel Rack

Mini Desktop Trash Bin - Fast Print (Vase Mode)

Auto-locking Hanger (Ribbed)