XP-Pen Deco01 V2 Cable Protector

Protect your drawing tablet's port! This is a custom-designed connector cover for the XP-Pen Deco01 V2. The USB-C port on slim tablets can be fragile, and constant movement often leads to cable disconnection or port damage.

This housing secures the USB-C cable in place, acting as a strain relief and preventing accidental unplugging while you draw.

Features:

• Port Protection: Reduces stress on the tablet's USB-C port.
• Secure Fit: Designed to slide onto the edge of the Deco01 V2 for a snug fit.
• Cable Management: Keeps the cable straight and prevents bending at the connector.

Print Settings:

• Material: PLA 
• Supports: Recommended for the internal cable cavity (Tree supports work best).
• Infill: 15-20% is sufficient.

Note: This was designed to fit the standard USB-C cable head. If you use a third-party thick cable, please check the dimensions.

 

Boost Me❤️ Why Boost This Model?
A broken USB-C port often means buying a whole new tablet. This simple print (costing pennies) can save your expensive device from that fate.
If this model helped you secure your cable or saved your tablet from a repair bill, a Boost is greatly appreciated! It encourages me to design more practical fixes.