World Flags Lapel Pins | National Day Badge

There are two ways of printing this . Face down and face up.

Face down is a single print. Gives a flat face.
Face up is a two part print that needs a drop of glue.

Both types are in the same profile. I didn't want to create a separate profile because i plan to add other flags later, and i want a single profile for each flag.

You will need a safety pin for each flag to be able to attach it to your clothing. Here is a picture of the kind of pin you need. These should be easily available everywhere.

There is a pause in the print. When the printer pauses, place the fixed side of the pin into the slot and resume the print. The printer will then lock the pin in place. It looks something like this.

If you are printing the two parts version. The pin slot prints separatly and needs to be glued. One small drop of glue is enough. The print pause procedure is exactly the same.

If you want me to make a flag pin for your country. Please let me know in the comments and i will try my best.

Happy Printing!