Phase 10 Card Box - Storage Case for Card Games

This is a sturdy, fully 3D-printable storage box designed specifically for the Phase 10 card game. 

The original Phase 10 packaging is made of thin cardboard that tends to fall apart over time; this box is the robust, long-lasting replacement it deserves. 

 

It fits all standard-sized playing cards (56 × 87 mm), making it compatible with a wide range of card games, especially those by Mattel. The lid features the iconic Phase 10 logo, but a version without the logo is also included for a clean, universal look.

 

How to use it

1. Print all parts as described below.
2. To assemble the hinges, insert a short piece of 1.75 mm filament through the hinge pin holes on the lid and base. This is the only "hardware" needed; something every FDM printer user already has on hand.
3. It is strongly recommended to secure the filament pin with a tiny drop of glue. Use as little as possible so that the hinge remains free-moving.
4. Place your Phase 10 cards (or any compatible deck in 56 × 87 mm format) into the two internal compartments. Each slot accommodates a card stack up to 18 mm thick, which is more than sufficient for a full Phase 10 set.
5. Close the lid, the integrated latches snap shut securely, keeping your cards safe during storage and transport.

Print Settings

Parameter	Recommendation
Material	Any Filament works; PLA or PETG recommendet
Infill	15-20%
Supports	Required only under the latch overhangs on the underside of the closures - standard (manuall) supports are sufficient

 

Boost MeIf you enjoy this model, I'd be absolutely thrilled to receive a free Boost, it really helps and means a lot to me.

The lid currently features the Phase 10 logo, but a version without the logo is also available for a clean and universal look. If you would like a version with a different card game logo. feel free to leave a comment.