Varang's Buugeng - Avatar inspired prop

 

 

Here's a model Varang's Buugeng: 

Size from tip to tip is 80cm, but you can scale to preference as the inner supports are also 3d printed, just make sure you keep the same scale for everything.

 

The internal supports add stiffness to the prop (should not break in half if it falls), and also help you with the alignment of the sections.

 

For the assembly, you're going to need superglue!

---------------------------------------------------------

Remember to 

Boost Me

If you like this model! :)

---------------------------------------------------------------

Here's the assembly guide:

When assembling, add superglue of all 4 sides of S1,S2,S3 parts.

 

 

Assembling pieces 3-5 can be a little tricky as the support is curved, wiggle the parts a little bit to make them slide in better!

And repeat on the other side!