Los diarios de la boticaria Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 112.21x160mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

Filaments Used:
    #000000 PLA eSUN Negro  Transmission Distance: 0.3
    #545454 PLA BambuLab Basic Dark Gray  Transmission Distance: 0.6
    #d1d3d5 PLA BambuLab Basic Light Gray  Transmission Distance: 1.7
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
    Start with Negro
    At layer #11 (0.96mm) swap to Dark Gray
    At layer #19 (1.6mm) swap to Light Gray
    At layer #25 (2.08mm) swap to Jade White for the rest.